Convoy M21C SST40 SFT40 KW CULPM1.TG XHP70.2 XHP70.3 Taschenlampe,21700 Taschenlampe,Taschenlampe

Parameter

Material: aluminum alloy

Low voltage warning: Ja

Reverse polarity protection: Ja

Lens Type: ar-coated lens

Reflektor:

               smooth reflector — SST40 , SFT40 , KW CULPM1.TG, XHP70.3 Hi

               orange peel reflector — XHP70.2

Output current:

               6A — SST40

               8A — SFT40 , KW CULPM1.TG

               5A — XHP70.2 , XHP70.3 Hi

Flux:

               2400LM — SST40

               2000LM — SFT40 , KW CULPM1.TG

               4000LM — XHP70.2 , XHP70.3 Hi

Switch position: tail

Mode memory: Ja

Tail stand: Ja

Battery charger includes: nicht enthalten

Battery type required: 1*21700 Batterie

Number of batteries required: 1

Größe: Head/body diameter: 55mm/28mm ,Länge: 163mm

Produktgewicht: 275G

Weight with box: 370G

Packungsgröße: 181 * 87 * 59mm

Driver (12groups):

It can control the flashlighttemperature not to exceed 55 Grad Celsius,

If the flashlight temperature is below 55 Grad Celsius, it will output full current. If it is above 55 Grad Celsius, it will constantly adjust the current so that the flashlight will not overheat.

12 groups:
1.click the switch to turn the flashlight on/off,tap the switch to select mode
2.if flashlight is turned on,tap the switch 20 times quickly to enter into config mode.(On a visual interface,as long as you click on an option, it means that the option is selected. The flashlight has no visual interface. It flashes to represent an option, and "tap the switch in the flashing process" means to select the option.)
   Möglichkeit 1 (normal-flash 1 time + buzz-flash): tap the switch to enter into sub-option to select the mode group,If the user has no operation, the config mode will enter option 2.
       ————-sub-option 1.1 (normal-flash 1 time) : tap the switch to select mode group 1 (0.1%, 1%, 10%, 35%, 100%, Blitz, biking, battery-check)
       ————-sub-option 1.2 (normal-flash 2 mal) : tap the switch to select mode group 2 (0.1%, 1%, 10%, 35%, 100%)
       ————-sub-option 1.3 (normal-flash 3 mal) : tap the switch to select mode group 3 (100%, 35%, 10%, 1%, 0.1%)
       ————-sub-option 1.4 (normal-flash 4 mal) : tap the switch to select mode group 4 (1%, 20%, 100%, Blitz, biking, battery-check, SOS)
       ————-sub-option 1.5 (normal-flash 5 mal) : tap the switch to select mode group 5 (1%, 20%, 100%)
       ————-sub-option 1.6 (normal-flash 6 mal) : tap the switch to select mode group 6 (100%, 20%, 1%)
       ————-sub-option 1.7 (normal-flash 7 mal) : tap the switch to select mode group 7 (0.1%, 1%, 10%, 50%, Blitz, biking, battery-check, SOS)
       ————-sub-option 1.8 (normal-flash 8 mal) : tap the switch to select mode group 8(0.1%, 1%, 10%, 50%)
       ————-sub-option 1.9 (normal-flash 9 mal) : tap the switch to select mode group 9 (50%, 10%, 1%, 0.1%)
       ————-sub-option 1.10 (normal-flash 10 mal) : tap the switch to select mode group 10 (1%, 10%, 35%, 100%)
       ————-sub-option 1.11 (normal-flash 11 mal) : tap the switch to select mode group 11 (100%, 20%, Blitz)
       ————-sub-option 1.12 (normal-flash 12 mal) : tap the switch to select mode group 12(100% only)
   Möglichkeit 2 (normal-flash 2 mal + buzz-flash): tap the switch to active the mode memory or inactive it,If the user has no operation,flashlight will enter into the last mode.

battery-check instructions:
 <2.95V 1 Blitz,
2.95-3.25V 2 flashes,
3.25-3.55V 3 flashes,
3.55-3.85V 4 flashes,
>3.85V 5 flashes